Eljer 015-0005 Specifications download pdf (Page 8)

Whirlpool Troubleshooting (continued)

WATER LEAKS:

1. Check compression ttings (union connectors) making sure they are properly aligned and secured. HAND TIGHTEN

ONLY. DO NOT USE ANY TOOLS.

2. Make sure the O-ring is properly seated and not damaged.

Do not run any pumps or heaters unless the tub is lled with water to a proper level. Damage due to dry running

pumps is not covered under warranty.

Repair Procedures

Most minor scratches (up to 1/64” deep) and cigarette burns can be removed by sanding the area with #180 or #240 wet

or dry sand paper and progressing down to #600 or #1200 grit. Finally, apply light bufng compound and buff area with a

clean stitched cotton bufng pad or equivalent. Use an extra application of ne bufng compound if necessary. For cracks

and major surface damage, call (800) 423-5537.

Save These Instructions

This product and its components are ETL listed and IAPMO approved.

-8-

1 2 3 4 5 6 7 8 9

No comments

Eljer 015-0005 Specifications Page 8